Cubicle Bedders

Features and Benefits

The Biddy Cubicle Bedder has been designed to bed cubicles in a fast, efficient way. The cubicle bedder can bed a cattle house in minutes, much quicker than using manual techniques. The bedder can also reduce material usage up to 50% as it spreads an even amount of material throughout the process.
The rate of material flow to the conveyor belt can be infinitely adjusted using the adjustment flow control plates. This will reduce the amount of material released into the cubicles allowing the operator to have complete control of the material.
Equipped with an agitator on the inside of the hopper the material can be directed onto the conveyor belt which can be dispensed from either side. The agitator also prevents material from bridging to the inside of the hopper.
The bedder is provided with dual spoke drums as standard which prevent the material clogging under the belt. This reduces maintenance and unnecessary wear of the conveyor components. The spoke drums are fixed to line-ar bearings which can adjust to tension and align the conveyor belt.

Specification

Heavy duty construction
Hardox Cutting edge
Large Internal Agitator
Heavy Duty Chevron belt
Duplex Chain drive conveyor
Direct drive agitator
Easy accessible flow control adjustment plates
2-pac painted finish

Applications

The cubicle bedder can be used for bedding with sawdust, chopped straw, paper, sand and lime. In addition the machine can be used for dry feeding and can also be adapted to dispense drainage stone.

Options/ Extras

Flow control value
Three point linkage
Hydraulic tipping frame

Available sizes
Cubicle Bedder Specs Depth (mm) Height (mm) Width (mm) Weight (kg) Cubic Capacity (m³)
CB 0.8 1040 1000 1650 430 0.8
CB 1.3 1185 1125 1855 525 1.3
CB 1.6 1250 1250 2060 615 1.6
CB 2.2 1250 1250 2460 750 2.2